Trust Us

PPV, APPV – PVC insulated wire for electric facilities

Technical Specifications

  • • Maximum permissible operating temperature in fixed installation from -40 ⁰C to +70 ⁰C;
  • • Rated voltage with a frequency up to 400 Hz: U - 450 V, Uconst. - 1 kV;
  • • Electric resistance of wire insulation at 20°С, 1 km length is not less than 106 Ohm;
  • • Test voltage of alternating current with frequency 50 Hz is 2,5 kV;
  • • Minimal bending radius is not less than ten times over minimum outer diameter of the wire.

Wire’s structure

1- Conductive core made of copper

2-Wire’s sheath

3- Dividing basis of a cable

PPV wire

  • • Conductive core is made of copper wire quality MM;
  • Core’s insulation is made of PVC;
  • • Wire coloring: white, natural or grey; yellow, orange or purple, red or pink; blue; green; brown; black.
  • Wire cores are in parallel laid and insulated with the dividing tape base.

*As per customer's request any coloring may be applied.

Applications

Wires applied to electric installations at fixed construction in power and illuminating networks and also for mounting electric equipment, machines and tools at rated voltage 450 V with frequency to 400 Hz and direct voltage to 1000 V. PPV wires applied to fixed mounting.

 

Table for ordering

Model

Number of cores and rated core section

Outer diameter of the wire not more than, mm

Estimated weight of 1km of the wire, kg

Factory length, m

Thickness

Width

PPV

2х1,5

3,3

7,8

39,8

100

PPV

2х2,5

3,9

9,0

62

100

PPV

3х1,5

3,3

12,3

60

100

PPV

3х2,5

3,9

14,1

94

100

Support request

Support request