Trust Us

ОКЭ-А Cable Assembly

Application

Cable assembly is designed for vertical inter-floor tube cabling in building entrances.

Benefits

Cable assembling can be terminated with connectors by manufacturer. It can be terminated from one side or from both ones as customized. Connector type is also customized (the main connector type in GRON technology is SC/APC). Cable assembly length is also customized but should be not less than 3 meters length. Cable assembly spacing is 1 meter.
Two-sided cable assembly maximum capacitance is 16 fibers.

Technical characteristics

Cable assembly is assembled of cable with the following technical parameters:
Cable has a LSZH jacket, which is incombustible, halogen-free and low smoking.
Jacket’s color is yellow and orange (this color specifies indoor cabling).
Inside the jacket there are fibers in 900 µm sheath (tight buffer). Each fiber has its individual color. Total bunch of fibers are placed into Kevlar threads, which serve as a strength element and provide fibers protection during cabling and cable bend.
The following fiber standards are used in cable assembly according to customizing: G.652D, Corning or Fujikura.

If the project requires both end cable assembly termination, connectors from one side are supplied in protecting sheath, made by means of heat shrinkage tube and corrugation tube, which are cut after cable pulling into a duct. Protecting sheath provide connectors protection during the process of pulling into the duct. To decrease protecting sheath diameter connectors are terminated with different length and are laid one after another.

Technical characteristics of ОКЭ-А cable with up to 16 fibers

Fibers number

Outer diameter,

mm

Weight, kg

Minimum allowable tension,
(N)

Minimum allowable crushing stress,
(N/100мм)

Minimum bend radius,
мм

Storage temperature,

Short time

Long time

Short time

Long time

Dynamic

Static

2

3,0

0,9

600

200

1000

200

20D

10D

-20+60

4

4,0

0,9

600

200

1000

200

20D

10D

-20+60

6

4,0

0,9

600

200

1000

200

20D

10D

-20+60

8

5,0

0,9

600

200

1000

200

20D

10D

-20+60

10

5,5

0,9

600

200

1000

200

20D

10D

-20+60

12

6,0

0,9

600

200

1000

200

20D

10D

-20+60

16

7,0

0,9

600

200

1000

200

20D

10D

-20+60

 

Example of reference signs for cable assembly with up to 16 fibers, SC/APC connectors, both sides terminated(A side is terminated with SC/APC connectors, B side is terminated with SC/APC connectors), with 1 meter both sides cutting, with 15 meters total length.

 

СК-ОКЭ-А-16-SC/APC-SC/APC-1/1-15m Cable Assembly

Support request

Support request