Trust Us

eks-10HH-1-M Inline Splicing Kits

for 1-core cables with insulation made of vulcanized (cross linked) polyethylene for 10 kV voltage

Technical performance

eks-10HH-1-М is heat shrinkable coupling.

The kit of coupling ncludes:

  1. Universal tear-off head bolt connectors from GPH Company;
  2. Special tapes;
  3. Heat shrinkable tubes;
  4. The kit for connection the screen and armor with using not brazed grounding system, which includes ground wire and spring ring;
  5. Installation manual.

Structure of the couplings

The electric field around the connected part and on the cut of the semiconducting layer of conductive cores made of by special tapes. Heat shrinkable tube with the adhesive layer is used to recovers the insulation of the conductive cores after removing the semiconducting layer.
Connection of the cores is made by tear-off head bolt connectors. The electric field around the junction of cores is aligned by special heat shrinkable tube. Insulation and sealing of the part of the junction is provided by heat shrink tubes with adhesive. Recover of the cable sheath is made by heat shrinkable tube.

Installation

  • Preparation of the cable is made in accordance with installation manual of the coupling;
  • It is recommended to use special tools to remove the semiconducting layer from the insulation.

Technological features

submission of the test voltage right after installation.

Features

The eks-10HH-1-M type couplings are corresponding to ST TOO 41021646-14-2007 and meet the requirements of GOST 13781.0-86 (State Standard).

Application

eks-10НH-1-М coupling is designed to connect the 1-core cables with XLPE insulation, PVC sheath, armored with steel tape or wire * on voltage up to 10 kV, operated at temperatures from - 500C to +500C, with relative humidity up to 80%, in cable constructions.

Kit

The kit can be supplied without sleeves or with pressure sleeves for copper or aluminum conductors by the customer request.

Cable type

For 1-core cables: APvEp-6/10, APvEgP-6/10, APvEgaP-6/10, PvEP-6/10, PvEgaP-6/10, PvEgP-6/10 and others (made in Russia); N2XS2Y, N2XS2Y, NA2XS2Y , NA2XSY, N2XSEY, 2XSEY, A2XSEY and others (imported, TS and VDE standard).

Order arrange table

Nominal voltage, kV

Cross section mm2

Number of the cores in the cable

Marking for order

10

50/95

1

eks-10HH-1-50/95-M

10

120/240

1

eks-10HH-1-120/240-M

10

300/400

1

eks-10HH-1-300/400-M

10

500/630

1

eks-10HH-1-500/630-M

* The kit of coupling with wire armor cable is ordered separately.

Support request

Support request