Trust Us

Joint sleeves eks-10SKaT-SL-M / eks-10СКаТ-СЛ-М

for 3-core cables with saturated paper insulation for the voltage 6 and 10 kV

Technical performance of the couplings

Eks-10SKaT-SL-M is a cold shrink connecting coupling with PU compound. Coupling is used for aluminum or lead core cables coated with saturated paper insulation of the voltage 6 and 10 kV. The kit of coupling includes: universal tear-off head bolt connectors from GPH Company; special tapes; heat shrinkable tubes with adhesive sub-layer; PU compound; kit for sheaths connection; plastic frame; Installation manual.

Structure of the couplings

The electric field voltage around the splicing cores is aligned by special heat-shrinkable tubes. Alignment of the electric field voltage at the edge of the cable sheath is made by special tape with high dielectric constants. The splicing place of cores are reinforced with the transparent frame. The space between cores and space between cores and sheath are filled with PU compound, which provides: hermetic sealing of connected cores and blockage of oil-colophony composition; necessary strength of couplings to shock currents of short circuit. Secure connection of sheaths, resistant to short-circuit currents, creates by grounding wire and spring rings. External protection and hermetic sealing is provided by heat shrinkable tube with adhesive sub-layer inside it. Finally, for additional hermetic sealing and protection of the coupling from mechanical damage plastic frame is used.

Technical features

  • treating of space between cores in cable roots is not required;
  • supply with tested voltage right after installation;
  • acceptable difference between cable height is 25 m;
  • no need for special tools.

Testing

Joint sleeve eks-10SТТ-SL-М is tested according to GOST 13781.0/86 (State Standard).

Characteristics

Joint sleeves eks -10SКаТ-SL-М made according to ST TOO 41021646-26-2007 and meet requirements of GOST 13781.0-86 (State Standard).

Application

eks-10SKaT-SL-M connecting couplings are designed to connect cables with aluminum or lead coated sheath with saturated paper insulation for the voltage to 10 kV, operated by: at ambient temperatures from -50 ° C to +50 ° C with relative humidity up to 80%; in cable constructions or in the ground.

Cable type

AABG, ASBG, SBG, AABlU, ASBlU, SBN, AAShvU, AAShP, AAB2lShvU, ASB2lShvU, SB2lShv, SBlU etc.

Table for order

Nominal voltage, kV

Lead core cross section, mm2

Name

Size, mm

Length, (L)

Diameter, (D)

6 and 10

16/25

eks-10SKaT-3-16/25-SL-M

900

100

6 and 10

35/50

eks-10SKaT-3-35/50-SL-M

950

110

6 and 10

70/120

eks-10SKaT-3-70/120-SL-M

1050

130

6 and 10

150/240

eks-10SKaT-3-150/240-SL-M

1150

140


Mounting of connecting coupling eks-10-SКаТ-3-70/120-SL-М

Support request

Support request