Trust Us

MS and MR / МС, МР Splicing and Branching Kits

for pressurised telecommunication cables with capacity up to 600 pairs


MS Splicing and MR and Branching Kits are used on pressurised telecommunication trunk cable lines, suitable as well as protected, direst buried and overhead applications and can be used on armoured balanced cables.

Kit components

  1. PE closure.
  2. Shield bond connectors.
  3. Shield conductor.
  4. Cable shield wire.
  5. MS2 modules or UY2 connector.
  6. Al-PE shielding tape.
  7. 2229 mastic tape.
  8. Polyurhethane Armorcast tape.


  • put closure parts onto cables;
  • preterminate cable according to instruction manual;
  • connect cable shield wires;
  • connect cable wires;
  • reconstruct wrapping insulation;
  • shield the splice by the shielding tape;
  • wrap the splice with Armorcast and mastic tapes.


Mounted splice is ready for operation right after installation.


The kit is available in different configuration by customer's order.

Order example

300-pairs distribution trunk cable is to be branched to three 100-pairs cables with screening. Cable wires are to be spliced by 25-pair modules. These requirements are met by 3MR 300 S25C-ep.


<< back

Support request

Support request