Trust Us

CCK 1x4 Compression Closure Kits

with PE closure for non-pressurised balanced cables

Description

CCK 1x4 Compression Closure Kits are used on non-pressurised balanced cables, suitable as well as the protected and direct buried applications, for both filled and dry cables, and provide water resistance and mechanical protection of cable splices. Compound compression method forces the 8882 High Gel up the cable core to stop water ingress.

Kit components

  1. PE closure.
  2. Shield bond connectors.
  3. Shield conductor.
  4. U1B connectors.
  5. P3F spacer tape.
  6. Screening copper tape.
  7. 2900R mastic tape.
  8. 8882 High Gel.
  9. Polyurhethane Armorcast tape.

Installation

  • put closure parts onto cables;
  • preterminate cable according to instruction manual;
  • connect cable shield wires;
  • connect cable wires;
  • reconstruct wrapping insulation by P3F tape;
  • shield the splice by the shielding copper tape;
  • wrap the splice with the plastic bag;
  • fill plastic bag with compound;
  • tightly wrap the splice with EZ tape;
  • slide closure parts down to the splice;
  • wrap the splice with 2228 and 88T tapes.

Maintenance

Mounted splice is ready for operation right after installation.

Note

The kit is available in different configuration by customer's order.

Order example

Two 1x4x0.9 trunk cables are to be spliced. These requirements are met by CCK 1x4(11/20E)-3-ep.

Support request

Support request